Compare Products


Clear All



RG-AM5532, i-Share+ Solution Master AP, 4 × 10G Optical Uplink Ports + 4 × Gigabit Electrical Uplink Ports

Recommended for complex environments, such as wireless dormitory networks, hotels, and dense office networks.

Highlight Features
  • Support three modes for data uplink, easily extend micro APs
  • Supply power to micro APs, no local power is required
  • Managing only one master AP to lower the management cost
  • Unified WIS cloud management, intelligent O&M
Sales Enquiry

The RG-AM5532 is an i-Share access point (AP) released by Ruijie Networks for complex application environments, such as wireless dormitory networks, hotels, and dense office networks.

The RG-AM5532 supports three modes for data uplink: four optical ports, four electrical ports, and two optical ports and two electrical ports. The uplink electrical ports can be connected to four IEEE 802.3af-compliant powered devices (PDs), two IEEE 802.3at-compliant PDs, or two IEEE 802.3af-compliant PDs and one IEEE 802.3at-compliant PD, to support standard PoE APs.

Based on the IEEE 802.11ax standard, one RG-AM5532 can extend to connect to 24 radio modules that provide two spatial streams at dual bands for each of 24 rooms. Each room can enjoy up to 2.976 Gbps bandwidth, meeting requirements in high-performance access scenarios, such as dormitory networks.

The RG-AM5532 design considers wireless network security, radio control, mobile access, and quality of service (QoS) guarantee, seamless roaming, and other factors to implement data forwarding, security, and access control of wireless users.


Master AP Hareware Product Specifications

Dimensions and Weight


Dimensions (W x D x H)

Main unit: 360 mm ×44mm ×440mm (14.17 in. x1.73 in. x 17.32 in.)

Shipping: 470 mm ×255 mm ×550mm (18.5 in. x 10.0 in. x 21.65 in.)

Rack height

1 RU


Main unit: 5.8 kg (12.79 lbs, including the package)

Shipping: 6.2 kg (13.67 lbs)



System Specifications


Switching capacity

68 Gbps

Packet forwarding rate

101 Mpps

Port Specifications


Fixed Service Port


4 x 1000Base-T Ethernet ports

4 x 10GE SFP+ ports


24 x 10/100/1000Base-T Ethernet ports with auto negotiation

Fixed Management Port

1 x RJ45 console port

Status LED

1 x system status LED

28 x electrical port status LEDs

4 x optical port status LEDs


Power button

Power Supply and Consumption


Input Power Requirements

Rated voltage range: 100 V AC to 240 V AC

Maximum voltage range: 90 V AC to 264 V AC

Frequency: 50/60 Hz

Rated current: 3 A

Power Supply to External Device


Max. Power Consumption

300 W

Environment and Reliability



Operating temperature: –10°C to +45°C (14°F to 113°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude between 3,000 m (9,843 ft) and 5,000 m (16,404 ft), every time the altitude increases by 167 m (548 ft.), the maximum temperature decreases by 1°C (1.8°F).

Max. operating height

3,000 m (9,843 ft)


Operating humidity: 5% RH to 95% RH (non-condensing)

Storage humidity: 5% RH to 95% RH (non-condensing)


Dual-fan design

Safe fan speed

9000 rpm

Shock and vibration standard

GB/T 2423.6

Environment standard

Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995

Mean Time Between Failure (MTBF)

400,000 hours (44 years) at the operating temperature of 25°C (77°F)

Regulatory Compliance

Regulatory Compliance

Regulatory compliance

EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, ETSI EN 300 386, IEC 62368-1, and EN 62368-1

*For more country-specific regulatory information and approvals, contact your local sales agency.

Software Specification

Applicable Software Version


Applicable software version

RGOS 11.9(6)W2P1 or later



Max. number of associated STAs


STA management

SSID hiding

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.

Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming

Security and Authentication


Authentication and encryption

Remote Authentication Dial-In User Service (RADIUS)

PSK and web authentication

QR code-based guest authentication, SMS authentication, and MAC address bypass (MAB) authentication

Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES)

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist


Wireless Intrusion Detection System(WIDS)

User isolation


Dynamic ACL assignment based on 802.1X authentication (used with the AC)


Time range-based ACL

ACL based on a Layer 2 interface

ACL based on a Layer 3 interface


CPU Protect Policy (CPP)


Network Foundation Protection Policy (NFPP)

Routing and Switching



MAC address learning and aging

Static and dynamic MAC addresses

Source MAC address filtering

Limitation on the number of MAC addresses learned on an interface


Jumbo frame length: 1518

Full-duplex and half-duplex modes of interfaces

IEEE802.1p and IEEE802.1Q

Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP)


Interface-based VLAN assignment

Max. number of SVIs: 4,094

Max. number of VLANs: 4,094

VLAN ID range: 1 to 4,094


ARP entry aging and proxy ARP

Max. number of ARP entries: 1,024

ARP check

IPv4 services

Static and dynamic IPv4 addresses

DHCP Server and DHCP client

DNS client

NTP Server and NTP client

IPv6 services

Static and dynamic IPv6 addresses

Neighbor Discovery (ND), IPv6 ND proxy, ICMPv6, and IPv6 Ping

DNSv6 client

NTPv6 Server and NTPv6 client

IP routing

IPv4/IPv6 static routing

Max. number of static IPv4 routes: 1,024

Max. number of static IPv6 routes: 1,000

Static black hole routing


Multicast-to-unicast conversion

IGMP Snooping

Network Management and Monitoring


Network management


Fault detection and alarm

Network management platform

Web management (Eweb)

User access management

Console, Telnet, SSH, FTP client, FTP server, and TFTP client

Show More
Resources All Resources
Learn about Products or Solutions
Software and Configuration
Order Information

Order the RG-AM5532 (i-Share+ solution master AP) first. Then order the RG-MAP852(V3) (i-Share+ solution micro AP).




The master AP of the i-Share+ solution APs with 24 downlink 1000 Mbps PoE ports, four uplink 1000 Mbps PoE electrical ports and four uplink 10GE SFP+ ports in auto negotiation mode. The uplink ports support three mutually exclusive modes: two 1000 Mbps electrical ports and two 10GE optical ports (supporting up to two settled APs), four 1000 Mbps electrical ports (supporting up to three settled APs) and four 10GE optical ports (not supporting settled APs). The master AP supports up to 24 i-Share micro APs. Each master AP uses four wireless controller licenses.


A universal Wi-Fi 6 dual-radio i-Share micro AP. The AP supports up to four spatial streams and the maximum access rate of 2.976 Gbps. It complies with IEEE 802.11b/g/n/ax and IEEE 802.11a/n/ac/ax standards. The AP provides one 1000 Mbps uplink port and four 1000 Mbps downlink ports. The AP can be can be mounted on a wall, ceiling, or junction box.

Show More
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Thank you for your feedback!

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details



How can we help you?


Get an Order help


Get a tech support