Compare Products

Hide

Clear All

VS

Picture

RG-5GNR-BBU5000 Banyan Cell Baseband Processing Unit

Networks for indoor scenarios such office buildings, shopping malls, residential buildings, airports etc.

Models

Series

Highlight Features

  • Flexible Framework Design
  • Evolving Multi-Cell Capacity
  • Flexible Cell Merging
  • Strong Multi-UE Capability
  • Environment Protection and Lower Power Consumption
  • Powerful Clock Holding
  • Multiple Synchronization Capabilities

Outstanding Performance

Flexible Framework Design

RG-5GNR-BBU5000 adopts the advanced framework design, with a variety of slots for expansion and evolution. It enables power redundancy and fan hot-swapping.

Evolving Multi-Cell Capacity

Currently, one 5G baseband card supports four 2T2R or two 4T4R 5G cells, and one 4G baseband card supports three 2T2R 4G cells.

The entire device supports up to eight 2T2R or four 4T4R 5G cells in NR and Long-Term Evolution (LTE) frequency division duplex (FDD) modes and three 4G cells, which requires two 5G baseband cards and one 4G baseband card. The device can be evolved to support more cells.

Flexible Cell Merging

This product can merge cells serving by all pRRUs (up to 128 pRRUs) under multiple pHUBs, allowing flexible networking.

Strong Multi-UE Capability

Each cell has 400 or more activated UEs and 1200 or more connected UEs. The entire device supports a maximum of 3200 activated UEs.

Environment Protection and Lower Power Consumption

RG-5GNR-BBU5000 incorporates various new energy saving technologies, including system-level data link design optimization and deep sleep. In addition to high-performance power design, RG-5GNR-BBU5000 is energy-efficient while providing high-speed wireless access services.

HA and Stabler Design

Multiple Synchronization Capabilities

RG-5GNR-BBU5000 supports dual-mode Global Navigation Satellite System (GNSS) and the automatic switching between GNSS, Beidou, and Global Positioning System (GPS). This product also supports IEEE 1588v2 clock synchronization.

Powerful Clock Holding

After the synchronization signal is lost, this product supports the clock holding function to ensure signal synchronization for 24 hours.

Design Philosophy for Vertical Industry

RG-5GNR-BBU5000 supports local offloading, also known as smart and minimalist offloading. This product offers various offloading solutions based on the IP address 5-tuple, public land mobile network (PLMN), and slice. Moreover, the main unit can integrate Multi-Access Edge Computing (MEC) cards to help ISPs develop markets in vertical industries and connect with applications in the industries in an "integrated" way.

Flexible Device Management Modes

Support for Automatic Site Deployment

RG-5GNR-BBU5000 can be remotely and automatically deployed in accordance with ISPs' specifications. 5G/4G networks can be quickly opened, helping ISPs rapidly respond to market requirements.

Support for Interconnection to NMS of Different Vendors

RG-5GNR-BBU5000 meets ISPs' specifications and features standard interconnection capabilities, and therefore can be interconnected to the NMSs of different vendors and realize joint management of 5G/4G networks.

Spesifikasi

RG-5GNR-BBU5000Hardware Specifications

Dimensions and Weight

RG-5GNR-BBU5000

Dimensions

(W × D × H)

442 mm × 338 mm × 88 mm

Rack Size

2U

Weight

Main unit < 11.5 kg

Installation Method

Rack-mounting, vertically mounted available



Port

RG-5GNR-BBU5000

Module Slots

Slot 1 + Slot 2: full-width 5G processing units (MBBU-BP5Gb-04VS)

Slot 3 + Slot 4: full-width 5G processing units (MBBU-BP5Gb-04VS)

Slot 5: half-width 4G processing unit (MBBU-BP4Ga-04XS)

Slot 6: reserved slot for expansion

Slot 7: half-width main control unit (MBBU-UMCCUb-02XS)

Slot 8: reserved slot for expansion

PSU 1 and PSU 2: 780 W, 220 V AC @ 50–60 Hz power module (RG-PA780I-LR); 780 W, 48 V DC power module (RG-PD780I-LR)

Fan: hot-swappable fan box as a standard configuration (MBBU-FANI-LR)

Card Ports

MBBU-BP5Gb-04VS 5G processing unit:

Two 10G SFP+ ports, reserved

One 10G SFP+ port, connecting to the 4G processing unit

Two 25G SFP28 ports, reserved

Four 10G/25G SFP+/SFP28 ports, connecting to downlink pHUBs

MBBU-BP4Ga-04XS 4G processing unit:

One 10/100/1000Base-T auto-sensing Ethernet port for local management

One 10G SFP+ port, connecting to the 5G processing unit

Three 10G SFP+ ports, reserved

MBBU-UMCCUb-02XS main control unit:

One RJ45 console port

One 10/100/1000Base-T auto-sensing Ethernet port for local management

One RJ45 1PPS+TOD port input for clock synchronization

One RJ45 1PPS+TOD port output for clock synchronization

One USB 2.0 port for local copying and system upgrade

Two 10G SFP+ ports for 5G/4G network backhaul

One SMA port, connected with the GPS/Beidou antenna

Status Indicator

MBBU-BP5Gb-04VS 5G processing unit:

One power LED

One system LED

One alarm LED

One lock LED

MBBU-BP4Ga-04XS 4G processing unit:

One power LED

One system LED

One alarm LED

One ETH status LED

Four CPRI LEDs

MBBU-UMCCUb-02XS main control unit:

One power LED

One system LED

One alarm LED

One GNSS status LED

Three lock LEDs

One ETH status LED

Synchronization Methods

GNSS, GPS, Beidou, 1588v2



Power Supply and Consumption

RG-5GNR-BBU5000

Power Consumption

At an ambient temperature of 25°C, when MBBU-BP5Gb-04VS (1×DU) and MBBU-UMCCUb-02XS (1×CU) are configured, and 5G services are performed, the power consumption of the entire device is smaller than 250 W.

Input Voltage

Rated value:110 V AC to 220 V AC, 50–60 Hz

Maximum value: 90 V AC to 300 V AC, 45–65Hz

–40 V DC to –57V DC



Environment and Reliability

RG-5GNR-BBU5000

Temperature

Operating temperature: –5°C to 55°C

Storage temperature: –40°C to 70°C

Humidity

Operating humidity: 5% to 95% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

Fan

Hot-swappable fan box (MBBU-FANI-LR)

IP Rating

IP31

Anti-vibration Ability

Seismic fortification intensity of 9 degrees or more

Compliance of Safety Regulations

GB4943.1-2011,EN60950-1

Compliance of EMC Regulations

GB/T 9254.1-2021,GB/T 17618-2015,EN55022,EN55024,3GPP TS 38.113 (2017-12 R15) ,YD/T 2583.17-2019

 

RG-5GNR-BBU5000Software Specifications

Performance Indicators

RG-5GNR-BBU5000

Number of pHUBs Managed by a 5G Baseband Processing Unit

A maximum of 16 (4-level cascade)

Number of pRRUs Managed by a 5G Baseband Processing Unit

A maximum of 128 (4-level cascade of pHUBs)

Number of pHUBs Managed by the Entire Device

A maximum of 32 (4-level cascade)

Number of pRRUs Managed by the Entire Device

A maximum of 256 (4-level cascade of pHUBs)

Number of Cells Configured on a 5G Baseband Processing Unit

A maximum of four 2T2R cells or two 4T4R cells

Number of Cells Configured on the Entire Device

A maximum of eight 2T2R cells or four 4T4R cells

A minimum of two 2T2R or 4T4R cells (with two MBBU-BP5Gb-04VS)

A minimum of one 2T2R or 4T4R cell (with one MBBU-BP5Gb-04VS)

Combined cell

Supported all pRRUs on a single baseband card combined into a single cell

Number of Associated UEs in a 5G Cell

1200

Number of Activated UEs in a 5G Cell

400

Total Number of 5G UEs

4800

Total Number of Activated 5G UEs

3200 (with two MBBU-BP5Gb-04VS)

Statistics of RRC connected users and RRC active users

Supported, cell level and host level

Number of Cells Configured on a 4G Baseband Processing Unit

A maximum of three 2T2R cells

A minimum of two 2T2R cells (with two MBBU-BP5Gb-04VS)

A minimum of one 2T2R cell (with one MBBU-BP5Gb-04VS)

Number of Associated UEs in a 4G Cell

384

Number of Activated UEs in a 4G Cell

200



Basic 5G Functions

RG-5GNR-BBU5000

Cell Bandwidth

100 MHz/60 MHz

Frame Structure and Modulation

Subcarrier spacing of 30 kHz

The 2.6 GHz band supports the DL-UL pattern period of 5 ms. The typical configuration of 10 slots is DDDDDDDSUU.

The 3.5 GHz band supports the DL-UL pattern period of 2.5 ms (dual periods). The typical configuration of 10 slots is DDDSUDDSUU.

The 3.5 GHz band supports the DL-UL pattern period of 2.5 ms (single period). The typical configuration of 5 slots is DSUUU or DDDSU.

Flexible configuration of the frame header offset

Uplink and downlink 256QAM modulation

Downlink Power Allocation

Configuration of the power improvement (up to 6 dB) for SIB, paging, and MSG2

Configuration of the PDCCH power improvement (up to 6 dB) for SIB, paging, and MSG2

Configuration of the CSI-RS power offset

Uplink Power Control

Configuration of the PRACH initial power and power adjustment step for operators

Open-loop/closed-loop power control for PUSCH, PUCCH, and SRS

Radio Resource Control (RRC)

Establishment, re-configuration, re-establishment, and release of RRC connections

Configuration of the status conversion timer

Core network paging function

Multi-PLMN broadcast in a single cell

Intra-System Mobility

Cell reselection

Intra-system switching over the NG/XG interface

NG Interface Management

Establishment of PDU session resources

Establishment of initial UE context information

AMF load balancing

Configuration of multiple NG interfaces on gNB

AMF pooling of NG interfaces

QoS Management

Non-GBR services

GBR services

Extend 5QI and customization of the 5QI level and configure the minimum uplink and downlink guarantee rates and scheduling levels for extended 5QI

Allocation and retention priority (ARP) for QoS parameters, used for admission control and user level identification

UM or AM mode (RLC mode) for DRB based on QoS requirements of services

Network Slice

Service slice perception based on the slice expression

AMF selection based on the slice identifier

Selection of a new AMF based on the reroute message of the core network

Isolation of resources on the wireless network side based on the slice user group

Voice Services

VoNR function

EPS fallback function

UE Energy Saving

Long and short DRX in RRC_connected state

Default paging DRX in idle state



Basic 4G Functions

RG-5GNR-BBU5000

Cell Bandwidth

5/10/15/20 MHz

Frame Structure

Uplink and downlink timeslot ratio of 2DL:2UL and 3DL:1UL with the period of 5 ms

Modulation Mode

Uplink and downlink modulation mode: BPSK, QPSK, 16QAM, 64QAM

Uplink Power Control

Configuration of the PRACH initial power and power adjustment step for operators

Closed-loop power control of MSG3\PUSCH\PUCCH

RRC

Establishment, re-configuration, re-establishment, and release of RRC connections

Establishment, re-configuration, and release of data bearers

Paging function

Intra-System Mobility Management

Intra-system cell reselection

Intra-system intra-/inter-frequency switchover

QoS Management

GBR services (QCI 1–4) and non-GBR services (QCI 5–9)

MBR, GBR, UE-AMBR, and QCI (priority, PDB, PER) parameters for scheduling based on QoS parameters

ARP for QoS parameters, used for admission control and user level identification

Voice Services

VoLTE function

64 SD or HD VoLTE service UEs in a cell

UE Energy Saving

Long and short DRX in RRC_connected state

Default paging DRX in idle state



Inter-System Interoperation

RG-5GNR-BBU5000

Data Service Interoperation

Coverage-based inter-system redirection

Coverage-based intra-system switchover

Voice Service Interoperation

Redirection-based EPS FB

Switching-based EPS FB



Management Functions

RG-5GNR-BBU5000

Management Setting

Configuration of the NTP server IP address and synchronization period

Alarms

Alarm for power-off, and reset of cards

Alarm in case of change in the in-place status of a power module or fan

Alarm for faults related to board card self-check upon startup and the board card OS

Alarm in case of faults related to the memory, embedded multimedia card (eMMC), or devices in slots

Alarm for abnormal air inlet temperature, temperature or voltage of key components, and system protection in case of a high-temperature alarm

Power Management

Display of overall power consumption, with a deviation of less than 5%

Remote power-on, power-off, and reset functions

Power management for boards in slots

Sensors

Air inlet temperature of the main control board

CPU temperature and input voltage

Memory temperature and input voltage

Key voltage information of the main control board

Temperature and voltage deviations in less than 5%



Special Functions

RG-5GNR-BBU5000

Local Offloading

Configuration of offloading policies and parameters through the NMS (e.g., to support offloading based on the slice ID, if slice ID configuration allowed)

Offloading based on the IP address 5-tuple (100 or more IP rules) or slice IDs (15)

PLMN-based offloading

Separate statistics of uplink and downlink traffic based on the IP address and reporting the traffic to the NMS

Configuration of the maximum offloading bandwidth for local offloading of service traffic, which is not greater than the cell-level peak rate

Configuration of the maximum offloading traffic in a period (at least 1 hour), and automatic shutdown of the local offloading function in case of traffic beyond such threshold (offloading traffic set based on the IP address)

Automatic Optimization

Automatic site deployment (comply with the standard of China Mobile and need OMC cooperation)

PCI conflict and confusion detection and reporting

Automatic identification and addition of intra-frequency/inter-frequency/inter-system neighboring cells

Energy Saving

Collection of the BS power consumption data

Frame symbol power-down

Picocell deep sleep function

Order Information

Model

Description

RG-5GNR-BBU5000

BBU chassis, which can be inserted fans, power modules, and board cards

MBBU-UMCCUb-02XS

Integrated 4G+5G main control module of the BBU, which receives synchronization signals and processes CU and other units

MBBU-BP5Gb-04VS

BBU 5G baseband processing unit, which processes and forwards 5G digital baseband signals

MBBU-BP4Ga-04XS

BBU 4G baseband processing unit, which processes and forwards 4G digital baseband signals

RG-PA780I-LR

AC/DC power module of the BBU, 780 W, 220 V AC @ 50–60 Hz, hot-swappable

RG-PD780I-LR

DC/DC power module of the BBU, 780 W, 48 V DC, hot-swappable

MBBU-FANI-LR

Fan module of the BBU, hot-swappable

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Kontakt

Kontakt

How can we help you?

Kontakt

Get an Order help

Kontakt

Get a tech support